Dvr Setup - Samsung SHR-5082 User Manual

1. These buttons enable you to select setup
items for DVR Setup, Viewer Setup, Site
Setup, and S/W Version.
2. In this box, you can set the details on each
setup item.
3. Using this button, you can exit from the
current window.
4. You can use buttons for saving the modified
data, returning the previous settings, and
exiting from the setup window.
 Setup Item Selection buttons
- DVR Setup: Allows you to modify the
settings of the DVR.
- Viewer Setup: Allows you to configure the
settings of Smart Viewer.
- Site Setup: Allows you to set the DVR
information which includes the name, IP
address, ID, and password for connection.
It can also allow you to register DVRs into a
site.
- S/W Version: Shows the software
information such as Smart Viewer version,
system requirement, and the DVR system
S/W version. You can remotely upgrade the
system software.
 Save/Cancellation of Revised Information
Click Apply to save the revised information and
click Cancel to return the previous settings.
 Closing the setup window
- Click X or Close to exit from the setup
window.
- If any setting is revised, the following
message box appears. If you press OK, the
revised information is saved and the setup
window exits. If you press CANCEL, the
revised information is lost and the setup
window exits.

DVR Setup

Click DVR Setup for configuring DVR-related
settings. It means that you can remotely
configure the settings of DVR using Smart
Viewer. The DVR setup items are System,
Camera/Audio, Monitoring, Recording, and
Network.
SHR-5162_Eng.indb 47
You can access to DVR Setup with the
Admin privilege. The button will not be
activated when you are connected to the
DVR with a user privilege.
1
1. The DVR names connected with the Admin
privilege will be listed here. When connected
to a DVR, the DVR name is displayed. When
connected to a site, the names of DVRs with
the Admin privilege are displayed. You can
select a DVR to configure the settings of it.
2. It displays the setup menu for the selected
DVR.
 System
You can configure the system-related settings.
For more details, see Chapter 5, "Menu Setup."
- System Information
It shows the information of the selected
DVR.
2
Smart Viewer _47
2007-06-18 ｿﾀﾀ・11:49:32