Installing The Document Extender; Adjusting The Output Tray - Kodak i4000 Plus Series User Manual

Installing the document
extender

Adjusting the output tray

3-4
• Insert the ends of the document extender into the holes on the input elevator
or the output tray and lower the extender into position.
The Kodak i4000 Plus Series Scanners are designed with improved stacking
performance which allows most users to scan documents without the
assistance of the output tray side guides and document stop. With one or both
side guides down and the height adjustment tab raised, you can quickly and
easily remove the scanned documents from the front-, right- or left-side of the
scanner. Try using this method before using the side guides and document
stop.
NOTE: If you find it more convenient to use the side guides and document
stop, see the next section for adjustment procedures.
• Adjusting the angle of the output tray — it is strongly recommended that
you scan documents with the angle of the output tray in the "up" position to
achieve best stacking performance. Just lift the front of the output tray and
the height adjustment tab will release from underneath the output tray.
To lower the output tray, gently push the height adjustment tab underneath
the output tray while lowering the output tray on the printer access cover.
A-61651 August 2013