Symantec 14541094 - pcAnywhere Host & Remote Implementation Manual page 85

Figure 8-3 shows the contents of a sample package deployment file.
Figure 8-3 Package deployment file data
{
Domain=TESTSERVER
Machine=TESTUSER1210
Package=PCANYWHERE.EXE
LocalPath=C:\Documents and Settings\User_Name\My Documents\Packager\Deployment
CommandLine="PCANYWHERE.EXE"
Status=Not Started
}
Saving a package deployment file
You can save the information in the Package Deployment window as a package
deployment file.
To save a package deployment file
1 In the Deployment Status dialog box, click Save Log.
2 Type a file name for the package deployment file, and then click Save.
Importing a preconfigured package deployment file
If you preconfigure a package deployment file, you can import that file into the
Package Deployment Tool. If you deploy to the same set of computers on a
regular basis, you can edit the package deployment file to reflect the appropriate
package file name and path instead of browsing for the computers through the
user interface.
To import a preconfigured package deployment file
1 In the Package Deployment window, click Open.
2 Browse to the package deployment file, and then click Open.
The details of the package deployment file populate the fields in the Package
Deployment window.
3 In the Package Deployment window, click Deploy.
4 In the Deployment Credentials dialog box, type the authentication
credentials required to access the target computers.
See "Entering deployment authentication information"
Deploying installation packages
Using the Package Deployment Tool
on page 86.
85