Symantec 14541094 - pcAnywhere Host & Remote Implementation Manual page 73

2 In the Package Editor dialog box, on the Installation Options tab, double-
click User or group name.
3 In the User Information dialog box, under User or group name, type the user
name or group name that will appear on the Customer Information screen
during installation.
4 Under Company name, type the company name that will appear on the
Customer Information screen during installation.
5
Click OK.
6 In the Package Editor dialog box, do one of the following:
Click OK to save your changes and close the Package Editor dialog box.
■
Click Apply to save your changes and continue configuring the package
■
definition.
7 If prompted, type a file name, and then click Save.
Including custom support information
Symantec Packager lets you specify a Web address, phone number, and other
custom support information. This feature, for example, lets value-added
resellers (VARs) and original equipment manufacturers (OEMs) create custom
installation packages that include their own Web addresses or support phone
numbers. This information is displayed on the optional installation panels
during the package installation; therefore, the package definition must use
Interactive installation mode.
To include custom support information
1 In the Symantec Packager window, on the Configure Packages tab, do one of
the following:
Create a new package definition.
■
Double-click an existing package definition to edit it.
■
Configuring installation packages
Configuring package definitions
73