Changing The Installation Sequence - Symantec 14541094 - pcAnywhere Host & Remote Implementation Manual

Changing the installation sequence

6 In the Package Editor dialog box, do one of the following:
Click OK to save your changes and close the Package Editor dialog box.
■
Click Apply to save your changes and continue configuring the package
■
definition.
7
If prompted, type a file name, and then click Save.
The products included in a package definition file are installed in the order in
which they appear on the Product Selection tab. By default, each product that
you add to a package definition is automatically added to the end of the
installation sequence. Some products require other products to install and
function properly. If a product in your package definition requires another
product, ensure that you list the products in the correct sequence. You can
change the order in which a product is installed by moving it up or down in the
installation sequence list.
To change the installation sequence
1 In the Symantec Packager window, on the Configure Packages tab, do one of
the following:
Create a new package definition.
■
Double-click an existing package definition to edit it.
■
2 In the Package Editor dialog box, on the Product Selection tab, under
Installation sequence list, select the product for which you want to change
the installation sequence.
3 Select one of the following to move the product or command to the desired
location in the list:
Move Up: Moves the selected product or command to an earlier
■
position in the installation sequence
Move Down: Moves the selected product or command to a later position
■
in the installation sequence
4 Do one of the following:
Click OK to save your changes and close the Package Editor dialog box.
■
Click Apply to save your changes and continue configuring the package
■
definition.
5 If prompted, type a file name, and then click Save.
Configuring installation packages
Configuring package definitions
65