HP T1936AA - Digital Sending Software Support Manual page 16

Personal address books
Select the Enable PABs check box to enable users to use their personal address books to
address e-mail on the MFP. Personal address book support is only available if authentication is
enabled and the authentication method is set to Microsoft Windows (see
Authentication tab" on page
with a user's personal address book. Make sure the Windows Messaging Component is
installed. If you have a MAPI client software program installed (such as Microsoft Outlook), this
component should already be in place.
DSS Address Books
HP DSS uses address books to store e-mail addresses that are manually typed by a user at the
device. If user authentication is enabled on the device, addresses are stored in a user's
individual HP DSS address book. Otherwise, the addresses are stored in a public HP DSS
address book. HP DSS address books are available to every MFP that HP DSS supports. If the
addresses contained in these address books are no longer needed, you can clear out any or all
of the HP DSS address books by clicking the Clear button in the DSS Address Books section.
A list of any existing address books appears, allowing you to clear one or more.
Using the Preferences tab
The Preferences tab specifies the path for the HP DSS temporary files. These files can be very
large, so a location with plenty of disk space should be selected. Click the Browse... button to
select a location.
Using the MFP Configuration tab
The MFP Configuration tab specifies which MFPs are using the HP DSS service, and also
provides an interface for customizing HP DSS features for specific digital sending devices.
To add a new MFP
1
2
If you know the hostname or IP address of the device, you can type it in the Hostname or IP Address
Note
text box under Manually enter an MFP's network name rather than using the Find MFPs button.
3
4
You can only add as many MFPs as you have "seats" in your HP DSS license. Near the top of the Add
Note
MFPs dialog box you can see how many sets you have available.
5
To configure an individual MFP
1
2
10 Chapter 1 - The HP MFP Digital Sending Software v.
select Daily, Weekly, or Monthly, you will be able to set a specific time and day of the week
for the replication process.
Click the Add... button near the bottom of the tab. The Add MFPs dialog box appears.
Click the Find MFPs button to find all MFPs on the network. Select the device you want to
add from the list that appears.
If you want the device you are adding to use the same settings as a previously configured
device, select the previously configured device from the When adding new MFPs copy
settings from drop-down list.
Click the Add--> button to add the device to the MFP List.
Click Close to close the Add MFPs window.
Select the MFP from the list on the MFP Configuration tab.
Click the Configure MFP... button. The dialog box that appears looks similar to the main
Configuration program interface. Use this interface to customize the digital-send settings
specifically for this device. Settings that are specified on these tabs override the settings that
5). The Microsoft Messaging API (MAPI) is also required to interface
4
"Using the
ENWW