Clutch; Silencer Packing Change - GAS GAS EC 125 - 2003 Service Manual

Table of Contents

Advertisement

WARNING
Operation with a damaged cable could result in an unsafe riding
condition.

CLUTCH

Proper clutch lever play between the clutch lever and the clutch
lever holder is 2-3 mm.
When there is too much lever play, first try adjusting the clutch lever.
Loosen the knurled locknut, turn the adjuster to obtain the proper
amount of lever play, and tighten the locknut.
(D)
(B)
(C)
(A)
(A). Clutch lever.
(B). Knurled Locknut.
(C). Adjuster.
(D). Hydraulic fluid tank.
EXHAUST SYSTEM
The muffler and silencer reduce exhaust noise and conduct the
exhaust gases back away from the rider.
If the muffler is badly damaged, dented, cracked or rusted, replace
it with a new one. Replace the silencer packing. If the exhaust noise
becomes too loud or the engine performance drops.
Silencer Packing Cange
- Remove the right side cover.
- Remove the silencer (B) mounting bolts (A) and pull the silencer
off toward the rear.
(A)
Install the inner pipe
- Remove the inner pipe mounting rivots, and pull out the inner pipe.
- Pull off the old silencer packing, and install the new silencer packing.
- Install the inner pipe into the silencer.
- Install the silencer and right side cover.
85
EC 2003 -
-
(B)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents