Setting The Input - Sherwood RD-6502 Operating Instructions Manual

When selecting the TONE
OFF : To listen to a program source without the tone effect. ("DIRECT" indicator lights up.)
�
ON : To adjust the tone for your taste. ("DIRECT" indicator goes off.)
■Note :
• When the EXTERNAL IN is selected as an input source, the TONE cannot be set to ON.
■When the TONE is set to ON to adjust the tone (bass and treble)
① Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired tone.
② Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to adjust the selected tone as desired.

SETTING THE INPUT

• D.IN (DIGITAL IN) : To assign the connected DIGITAL INs to the desired input.
• AUTO (AUTO SURROUND) : To select the auto surround mode or the manual surround mode.
• RETURN : To return to the previous menu.
When selecting the BASS
• The tone level can be adjusted within the range of
-10 ~ +10 dB.
• In general, we recommend the bass and treble to
be adjusted to 0 dB (flat level).
• Extreme settings at high volume may damage your
speakers.
• To complete tone adjustment, repeat the above
① ②
steps and .
32