Sherwood RD-6502 Operating Instructions Manual page 22

Memorizing the adjusted channel levels
• You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the
memorized whenever you want.
.
1
After performing the steps 1 ~ 4 in "Adjusting the current channel level" procedure on page 20,
press the (MEMORY/) ENTER button.
.
2
Select the desired one of REF 1 and REF 2.
.
3
Confirm your selection.
Recalling the memorized channel levels
.
1
Press the CHANNEL LEVEL button.
• "CAL " (or "REF 1", etc.) is displayed for several
seconds.
• If the channel level mode display disappears,
press this button again.
• The "1" of "REF 1" indication flickers for several
seconds.
• If the preset memory disappears, perform the
above step 1 again.
• The adjusted channel levels have now been
memorized into the selected memory.
.
2
Select the desired one of REF 1 and REF 2.
• Then the channel levels memorized into the
selected preset memory are recalled.
21