Encore ENRTR-514 User Manual page 9

ENRTR-514 User's Manual
b) Select the "Internet Protocol (TCP/IP)" for the network card on your system, then click
"Properties", window below will appear.
‧ If you decide to use IP address from the Broadband Router, select "Obtain an IP address
automatically".
‧ If you decide to use specific IP address, select "Use the following IP address". Make sure
enter correct addresses in "IP Address" and "Subnet Mask" fields.
‧ You must set the Broadband Router's IP address as "Default Gateway".
‧ If the DNS Server fields are empty, select "Use the following DNS server addresses" and
enter the DNS address is provided by your ISP, then click "OK".
- 8 -