Encore ENRTR-514 User Manual page 21

ENRTR-514 User's Manual
(a) Dynamic IP address
Select this option if your ISP provides you an IP address automatically. This option is typically used for
Cable services. Please enter the Dynamic IP information accordingly.
DHCP: Obtain an IP address automatically from the ISP.
MAC Address Clone: You can use the "Clone MAC Address" button to copy the MAC address of the
Ethernet Card installed by your ISP and replace the WAN MAC address with this MAC address.
(b) Static IP
The IP address and Subnet Mask of Broadband Router can be seen by external user on the Internet
(including your ISP). If your Internet connection requires a static IP address, then your ISP will provide you
with a Static IP Address and Subnet Mask.
IP address: IP address is given from your ISP.
Subnet Mask: Enter the subnet mask of the Broadband Router.
Gateway Address: Enter the Gateway address assigned by your ISP.
MTU (576-1500): You can specify the maximum size of your transmission packet to the Internet. Leave it
as it is if you to not wish to set a maximum packet size.
- 20 -