Table of Contents
Advertisement
ENRTR-514 User's Manual
3.5 LAN
3.5.1 LAN Settings
Configure the Gateway address of ENRTR-514 Broadband Router. To dynamically assign the IP address
for client PCs, enable the DHCP Server, set the lease time, and then specify the address range.
Valid IP addresses consist of four numbers, and are separated by periods. The first three fields are the
network portion, and can be from 0-255, while the last field is the host portion and can be from 1-254.
IP address: This is the router's LAN port IP address (Your LAN clients default gateway IP address)
Subnet Mask: Specify a Subnet Mask for your LAN segment.
The Gateway acts as DHCP Server: You can enable or disable the DHCP server.
IP Pool Starting Address: Enter the first address that should be assigned by the DHCP server.
IP Pool Ending Address: Enter the last address that should be assigned by the DHCP server.
Lease Time: Enter the number of hours that a client can use the assigned IP address.
DNS Proxy: To enable or disable DNS Proxy (Domain Name Service).
- 25 -
Hide quick links:
Advertisement
Table of Contents
