Table of Contents
Advertisement
ENRTR-514 User's Manual
3.6.2 Port Triggering
Some applications require multiple connections, such as Internet gaming, video conferencing, Internet
telephony and others. These applications cannot work when Network Address Translation (NAT) is
enabled. If you need to run applications that require multiple connections, specify the port normally
associated with an application in the "Trigger Port" field, select the protocol type as TCP or UDP, then
enter the public ports associated with the trigger port to open them for inbound traffic.
Enable: Enable the Port Triggering function.
Trigger Port: This is the out going (Outbound) range of port numbers for this particular application.
Trigger Type: Select whether the outbound port protocol is "TCP", "UDP" or "Both".
Public Port: Enter the In-coming (Inbound) port or port range for this type of applications (e.g. 2300-2400,
47624).
Type: Select the Inbound port protocol type: "TCP", "UDP" or "Both".
Comment: The description of this setting.
- 28 -
Hide quick links:
Advertisement
Table of Contents
