Upper (balcony) section
2)
Open a 2nd ViewPoint window and design a system to cover the balcony area only
- using the other 5 W8LCs in Auto mode. (Use plane 3 and zero the plane 1&2
dimensions)
Dual progressive curvature array – upper section only
Set the lower of the five cabinets to the height of the floor at the front of the balcony –
point Z on the next ViewPoint Array page below...
Set the coverage stop to the furthest seat but exa ggerate the coverage start until the start
line from the bottom of the lower cabinet extends towards the front balcony ear height.
Dual progressive curvature array – upper section point Z = 6.5m
All material © 2007. Martin Audio Ltd. Subject to change without notice.