Important Note:
MA2.8S power amplifier output NL4 connectors carry both
channels (e.g. pins +1/-1 = Ch1, +2/-2 = Ch2).
Always use NL2 connectors for power amplifier outputs to
avoid mispatching.
W8LC
C o n n e c t o r
NL8
+1
-1
+2
-2
+3
-3
+4
-4
Neutrik Cable and panel connector part numbers
Please note the following part numbers when ordering loudspeaker connectors to make
up NL8 cables and patch panels:
Neutrik NL8 connectors
NL8FC
8 pole cable (female)
NL8MPR
8 pole panel (male)
NL8MM
8 pole inline coupler (male- male)
Connectors should be kept in good, clean condition to ensure full, undistorted
loudspeaker performance. Worn, corroded or damaged pins and sockets can cause
severe distortion or loss of signal.
Recommended loudspeaker cable
8-core cable is required for W8LCs. Although some Wavefront series loudspeakers
use less than 8 cores we recommend that rental companies standardise on 8-cores for
W8LC Pin-outs and cabling
C o n n e c t o r
PA-Con
A
B
C
D
E
F
G
H
Function
W8LC
Low +
Low -
Low +
Low -
Mid +
Mid -
High +
High -
All material © 2007. Martin Audio Ltd. Subject to change without notice.