Table of Contents
Advertisement
W8LS side arrays
Matching a W8LS side array to the curvature of the main W8L Longbow system is easy.
Simply copy the array shape exactly.
WLX side arrays
If you specify a WLX side array it should be designed to match the curvature of the main
array. Matching adjacent WLX and W8LC array shapes is difficult (as they are different
shapes and sizes) so ViewPoint does it for you.
Enter the number of WLXs you wish to use in the number box to the right of the
Match
WLX
button, then click the
Match WLX
button.
A WLX array is generated that has a similar shape to your original main array.
Splaying WLX cabinets in mixed systems
In mixed WLX/W8LC systems ViewPoint may be used to aim the upper WLXs as
close to the main audience area as the rigging system will allow whilst keeping the
lower W8LC array pointing in the correct position for best coverage.
Click the
control to enable/disable this feature.
Splay WLX
For subwoofer placement and alignment tips, see
section 5.7.
All material © 2007. Martin Audio Ltd. Subject to change without notice.
Hide quick links:
Advertisement
Table of Contents
