Martin Audio W8L Longbow Application Manual page 49

The cabinet grid position can be selected as either Front or Rear depending on the
amount of system tilt required. The rear positions makes more down-tilt (+ve angle)
available and the front position makes more up-tilt (- ve angle) available.
Lifting Bar Option
A Lifting Bar option is available for W8LC, WLX and W8LM flown arrays.
When Lifting Bar is selected, further options become available.
The lifting bar can be placed in the Rear or Front position and can be lifted at either
one or two points.
Single Point Lift
This displa ys the Nearest hole in the lifting bar and the Actual Angle of the grid
when lifted at that hole.
Note that ViewPoint will display a warning if there is no suitable hole available.
All material © 2007. Martin Audio Ltd. Subject to change without notice.