To learn more about what each component does, see
VirusScan software?" on page 29
11. Choose the option you prefer, then click Next> to continue.
If you chose Custom Setup, you'll see the panel shown in
Otherwise, skip to
12. Choose the VirusScan components you want to install. You can:
•
Add a component to the installation. Click
component name, then choose
local hard drive from the menu that appears. To add a component
and any related modules within the component, choose
This feature, and all subfeatures, will be installed on local
hard drive instead. You can choose this option only if a component
has related modules.
•
Remove a component from the installation. Click
component name, then choose
available from the menu that appears.
NOTE: The VirusScan Setup utility does not support the other
options shown in this menu. You may not install VirusScan
components to run from a network, and VirusScan software
has no components that you can install on an as-needed basis.
of the VirusScan User's Guide.
Step 14 on page 42
to continue with your installation.
Figure 2-8. Custom Setup panel
Installing VirusScan Software
"What comes with
beside a
This feature will be installed on
This feature will not be
Administrator's Guide
Figure
2-8.
beside a
41