(10) Wake On-LAN Headers (3-pin): WOL
This connector connects to a LAN card with a WAKE ON-LAN output. This
connector power up the system when a wake up signal is received through the
LAN card.
NOTE: This feature requires that Wake On LAN or Ring In Wake up is enabled.
(11) FAN Speed Headers (3-pin): CPUFAN, SYSFAN
These connectors support cooling fans of 350mA (4.2 Watts) or less, depending
on the fan manufacturer, the wire and plug may be different. The red wire
should be positive,
board taking into consideration the polarity of connector.
(12) IR infrared module Headers (10-pin): IR, CIR
Turbo SW/
SMI
Power LED
Keyboard
Lock
while the black should be ground. Connect the fan's plug to the
CPUFAN
SYSFAN
21
PWR
IDELED
GND
VCC
GND
GND
VCC
NC
GND
GND
NC
GND
VCC
System Case Connections
WOL
1
3
Wake-On-LAN Headers
1
3
1
3
Turbo LED
Reset SW
Speaker