Adjusting the Position of the
Printout Image
You can adjust the position of the printout image as
shown in the illustration in step 3, below, for the
2UPC-R203 series and the 2UPC-R205 series. Adjust
the image position, as required, or when the blank
portion appears on the edge of the printout.
1,4
1
Press the MENU button.
The printer is switched to the off-line mode.
2
Press the F and f buttons to display PRINT
OFFSET.
F
f
Press
and
until PRINT OFFSET appears.
The offset amount for the current position
3
Press the G and g buttons to shift the printout image
to the desired position, while looking at the
printout.
L1: Moves to the left by 0.6 mm from the default
position.
L2: Moves to the left by 1.2 mm from the default
position.
R1: Moves to the right by 0.6 mm from the default
position.
22
Menu Operations
2
3
R2: Moves to the right by 1.2 mm from the default
position.
L2, L1
R1, R2
For the 2UPC-R203
series
To return to the default position
Display 0.
4
Press the MENU button after completing the
adjustment.
The printer returns to the on-line mode.
Access the following site to get the latest information on
the printer.
http://www.sony.net/Products/DP-driver/
L2, L1
R1, R2
For the 2UPC-R205
series