Changing An Image Size And Position - Sony DPP-SV88 Operating Instructions Manual

Adding effects to an image
To save the image with the selected effects
1
Press SAVE.
A dialog box to select the destination is displayed. You can select the
destination from either "Memory Stick," PC card or CD-R/RW disc.
2
Press the arrow (B/b) button to select the destination.
The confirmation message is displayed.
3
Press the arrow (B/b/v/V) button to select "Yes" to save the image
or "No" to cancel saving and then press ENTER.
• When you select the "Memory Stick" or PC card as the destination, the
image is added to the thumbnails.
• When you select the CD-R/RW disc as the destination, the dialog box to
select the destination folder is displayed. Select the folder and save the
image.
Notes
•If the "Memory Stick" or PC card is in write protect status, you cannot save an image
in the "Memory Stick" or PC card.
•While saving the image, do not turn off the power or remove the "Memory Stick," PC
card or CD-R/RW disc from the printer. The "Memory Stick," PC card or CD-R/RW
disc may be damaged.

Changing an image size and position

In the EFFECT menu (page 44), press the arrow (B/b) button to
select "+" to enlarge an image or "–" to reduce an image and then
press ENTER.
Each time you press ENTER, the image is enlarged or reduced:
•–: up to 60%
•+: up to 200%
GB
46