Kyocera Ci1000 Technical Reference Manual page 249

Table 7.49. KPDL Page Device Parameters (Sheet 3 of 3)
Preceding Stack Parameter
PunchMode
SlipSheet
SlipSheetDetails
CopyMode
PreRenderingEnhance
DeviceRenderingVividInfo
DeviceRenderingRGBInfo
DeviceRenderingCMYKInfo
a
Available media type strings are as follows:
(Plain)
(Transparency)
(Preprinted)
(Labels)
(Bond)
(Recycled)
(Vellum)
(Rough)
(Letterhead)
(Color)
(Prepunched)
(Envelope)
(Card Stock)
(CoatedPaper)
(Duplex)
(Custom Type1)
(Custom Type2)
(Custom Type3)
(Custom Type4)
(Custom Type5)
(Custom Type6)
(Custom Type7)
(Custom Type8)
Result Description
int Punch using sub style. (DF-71)
1: Native style of punching
2: Sub style
int Insert transparency separator.
0: No separator
3: Insert a separator when a set of job is printed.
dict Control the detailed parameters of punching. See
CopyMode below.
int Print on transparency separator.
1: Do not print on separator
2: Print on separator
bool Control resolution enhancement.
When /HWResolution is set to 600 dpi.
true: Fast 1200dpi
false: 600dpi
dict Model FS-5900C only. Control vivid color mode.
Ex: << /DeviceRenderingVividInfo <<
/VividColor bool >> >> setpagedevice
bool (true: Vivid mode on, false: Vivid mode off)
dict Controls RGB emulation.
Ex: << /DeviceRenderingRGBInfo <<
/VirtualColorDevice << /ColorTransform name >>
>> >> setpagedevice
name
/sRGB
<< /DeviceRenderingRGBInfo <<
/VirtualColorDevice null >> >> setpagedevice
RGB emulation is not performed.
dict Controls ink simulation.
Ex: << /DeviceRenderingCMYKInfo <<
/VirtualColorDevice << /ColorTransform name >>
>> >> setpagedevice
name
/SWOP
/EURO
/Normal: Normal ink simulation
<< /DeviceRenderingCMYKInfo <<
/VirtualColorDevice null >> >> setpagedevice
Does not perform ink simulation.
KPDL Operators
7-137