Kyocera Ci1000 Technical Reference Manual page 226

Chapter 7 Emulation
Default States (DF)
Initial Conditions (IN)
7-114
Table 7.42. Default States (DF)
Function Equivalent Instruction Default Value
Plotting mode PA;
Polygon mode PM0; PM2;
Line type LT;
Line pattern length LTn,4;
Scaling SC;
Input window IW;
Circle and arc resolution –
Symbol mode SM;
Tick length TL;
Mask value IM233,0,0;
Fill type FT;
Fill spacing FT;
Fill angle FT;
Pen thickness PT;
Label origin –
Relative direction DR1,0;
Relative size SR;
Character space ES 0, 0;
Character slant SL;
Label buffer BL ETX;
Label terminator DT ETX;
Label origin LO;
Character set SS;
Standard character set CS0;
Code tolerance CT;
Alternate character set CA0;
Table 7.43. Initial Conditions (IN)
Function Equivalent instruction Initial condition
Default conditions DF;
Scaling points IP;
Coordinate system rotation RO;
Absolute (plotter units)
Empty polygon
Solid line
4% of distance between P1 and P2
Off (plotter units used for x- and y-coordinates)
Set to hard-clip limits
5 degrees
Off
x-axis: 0.5 % of | P2y - P1y |
y-axis: 0.5% of | P2x - P1x |
All errors recognized, but no response to service request
or parallel port.
Type 1 (bidirectional fill)
1% of distance between P1 and P2 (used only in fill types
3 and 4)
0 degrees
0.3 mm (fill spacing for fill types 1 and 2)
Current pen position
Horizontal characters
Character width: 0.75% of | P2x - P1x |
Character height: 1.5% of | P2y - P1y |
None
0 degrees
None
ETX (ASCII code 3)
Position number
Standard character set
Character set 0
Angle mode of AA, AR, CI, or WG
Character set 0
Default values
Initialized according to paper size
0 degrees (default setting)