Table of Contents
Advertisement
The System - Device Information - Interface Information window provides
the following information.
Item
Protocol
Information
218
TCP/IP
IPv6
Bonjour
FTP
Dynamic DNS
IPP
LPD
RAW Port
SLP
SMTP
SNMP
WSD Print
AppleTalk
NetWare
IEEE802.1x
Description
If Enable is displayed, TCP/IP is enabled.
If Disable is selected, TCP/IP is disabled.
If Enable is selected, IPv6 is enabled.
If Disable is selected, IPv6 is disabled.
If Enable is selected, Bonjour is enabled.
If Disable is selected, Bonjour is disabled.
If Enable is selected, FTP is enabled.
If Disable is selected, FTP is disabled.
If Enable is selected, Dynamic DNS is
enabled.
If Disable is selected, Dynamic DNS is dis-
abled.
If Enable is displayed, IPP is enabled.
If Disable is selected, IPP is disabled.
If Enable is selected, LPD is enabled.
If Disable is selected, LPD is disabled.
If Enable is selected, RAW Port is enabled.
If Disable is selected, RAW Port is disabled.
If Enable is selected, SLP is enabled.
If Disable is selected, SLP is disabled.
If Enable is selected, SMTP is enabled.
If Disable is selected, SMTP is disabled.
If Enable is selected, SNMP is enabled.
If Disable is selected, SNMP is disabled.
If Enable is selected, WSD Print is enabled.
If Disable is selected, WSD Print is dis-
abled.
If Enable is displayed, AppleTalk is enabled.
If Disable is selected, AppleTalk is disabled.
If Enable is displayed, NetWare is enabled.
If Disable is selected, NetWare is disabled.
If Enable is selected, IEEE802.1x is
enabled.
If Disable is selected, IEEE802.1x is dis-
abled.
Viewing Printer Status
Advertisement
Table of Contents
Troubleshooting
