Side Deflector Assembly; Skid Shoe Assembly - Alamo SL60 Operator's Manual

SIDE DEFLECTOR ASSEMBLY

1. Place Side Deflector Panel (3) on top lip of left
rear discharge chute.
Strap (4) on top of panel and align holes of
strap, panel, and mower deck. Secure together
using 1/2" x 1-1/4" Bolts (1) and Locknuts (2).
2. Secure side deflector panel (3) end to chute
using bolts (1), Flatwasher (5), and Locknut (2).
3. Tighten all bolts and nuts to the recommended
torque. (Refer to Image Asm-R-0273)

SKID SHOE ASSEMBLY

1. Attach Flat Bar Left and Right Hand Skid Shoes
(1 and 5) to the underside of the mower side
skirts using 3/8" x 1-1/2" Bolts (2), Flatwashers
(3), and Locknuts (4).
underside up to ensure that threads do not
become worn and nuts can be removed if skid
shoes are to be replaced at a later time.
2. Secure Front Right and Left Hand Skid Shoes
(6 and 7, optional equipment) to the front of the
mower using bolts (2), locknuts (4), and
lockwashers (3).
multiple hole patterns that enable deck height
to be placed at desired mowing height.
3. Tighten all bolts and nuts to the recommended
torque. (Refer to Image Asm-R-0274)
SL60 03/07
© 2007 Alamo Group Inc.
ASSEMBLY
Place Side Deflector
Insert bolts from the
Front skid shoes have
Assembly Section 3-5