Skid Steer Requirements; Rops And Seat Belt - Alamo SL60 Operator's Manual

3. SKID STEER REQUIREMENTS

Skid Steer Requirements and Capabilities
• ASAE approved Roll-Over Operator Protective Structure and Seatbelt.
• Operator Protective Door ................. Contact authorized skid steer dealer for equipping unit with
• Skid Steer Warning Equipment ........ Slow Moving Vehicle (SMV) emblem, proper lighting
• Hitch ................................................. Universal Mount, Quick Hitch
• Front Auxiliary Hydraulics................. Mower drive motors must be matched with the hydraulic output
Mower Drive Motors:
Low Volume ............... For Systems Delivering 11-14 GPM at 1500-3000 PSI;
Medium Volume ......... For Systems Delivering 15-19 GPM at 1500-3000 PSI;
High Volume .............. For Systems Delivering 20-25 GPM at 1500-3000 PSI;

3.1 ROPS and Seat Belt

The tractor must be equipped with a Roll-Over-Protective-Structure (ROPS) (tractor cab or roll-bar) and seat
belt to protect the operator from falling off the tractor, especially during a roll over where the driver could be
crushed and killed. Only operate the tractor with the ROPS in the raised position and seat belt fastened.
Tractor model not equipped with a ROPS and seat belt should have these life saving features installed by an
authorized dealer. OPS-U- 0003
Operate this Equipment only with a Power Unit equipped with an
approved operator Roll-Over Protective Structure (ROPS).
wear seat belts. Serious injury or even death could result from falling
off the Power Unit--particularly during a turnover when the operator
could be pinned under the Operator Protective Structure.
SL60 03/08
© 2008 Alamo Group Inc
OPERATION
operator protective door.
capacity of the skid steer
105 ft./lbs. Torque at 2500 PSI
127 ft./lbs. Torque at 2500 PSI
153 ft./lbs. Torque at 2500 PSI
Operation Section 4-5
Always
(SPU-14)