Sevice Call Table; Service Call Errors - Canon 1692B002 Service Manual

Code
03830315-2569
03830307-256A
03830309-256B
03830308-256C
03830304-2570
03830301-2571
03830302-2572
03830303-2573
03830312-2574
03830313-2575
03830306-2576
03830305-2578
03830315-2579
03830307-257A
03830309-257B
03830308-257C
03841001-2819
03841101-2818
03841201-2816
03841201-2817
03841001-281B
03860002-2E0A
03860002-2E0C
03861001-2405
03861001-2406
03862000-2E09
03870001-2015
03890000-2920
03890000-2921
03900001-4042
03900001-4049
E194-4034

8.4 Sevice Call Table

8.4.1 Service call errors

Codes correspond to the numbers shown on the DIPLAY in the service mode.
Code Description
E141-4046 Recovery system rotation count full
E144-4047 Feed system counting error
E146-4001 Waste ink count full
E194-404A No ink ejection counting error
E161-403E Abnormally high temperature: printhead R
E161-403F Abnormally high temperature: printhead L
E196-4040 Checksum error
E196-4041 Flash memory clearing error
E196-4042 Flash memory write error
E196-4045 Engine EEPROM write error
E196-4049 Transfer ROM data type error
E196-4042 MIT Data transfer error
E198-401C RTC error
E198-401D RTC low battery error
E198-401E RTC clock stopped
E199-404B Humidity sensor unpluged
Status
Ink tank EEPROM error (PGY)
Ink tank EEPROM error (R)
Ink tank EEPROM error (B)
Ink tank EEPROM error (G)
Remaining ink low (BK)
Remaining ink low (Y)
Remaining ink low (M)
Remaining ink low (C)
Remaining ink low (PM)
Remaining ink low (PC)
Remaining ink low (MBK)
Remaining ink low (GY)
Remaining ink low (PGY)
Remaining ink low (R)
Remaining ink low (B)
Remaining ink low (G)
Maintenance cartridge tank full
Maintenance cartridge not installed
Maintenance cartridge EEPROM error
Maintenance cartridge ID error
Empty capacity of the maintenance cartridge when cleaning it various is insufficient.
Manually fed cut sheet was already loaded even though received data indicated roll media
When the roll paper was loaded, the data of the cut sheet specification was received.
Media set position unsuitable for borderless printing
Received data unsuitable for borderless printing
Roll paper running out
Cutting failure
Cannot take up media
Taking up media not stopping
MIT data transfer failure
Forwarding ROM data machine kind difference
Sensor calibration error
T-8-4
Display message
ERROR Exxx-xxxx
Call For Service
Chapter 8
0014-9442
8-5