Sevice Call Table; Service Call Errors - Canon iPF700 Series Service Manual

Code*
03830102-2522
03830103-2523
03830104-2520
03830106-2526
03830106-2527
03830201-2541
03830202-2542
03830203-2543
03830204-2540
03830206-2546
03830206-2547
03830301-2561
03830302-2562
03830303-2563
03830303-2572
03830304-2560
03830304-2570
03830306-2566
03830306-2567
03830306-2576
03830306-2577
03830312-2571
03830313-2573
03841001-2819
03841001-281B
03841101-2818
03841201-2816
03841201-2817
03860002-2E02
03860002-2E0A
03860002-2E0C
03861001-2405
03861001-2406
03862000-2E09
03870001-2015
03900001-4042
03900001-4049
E194-4034

8.4 Sevice Call Table

8.4.1 Service call errors

*Codes correspond to the numbers shown on the DIPLAY in the service mode.
Code*
E141-4046
E144-4047
E146-4001
E161-403E
E194-404A
E196-4040
E196-4041
E196-4042
E196-4043
E196-4044
E196-4045
E198-401C
E198-401D
E198-401E
Description
Ink tank not installed (M)
Ink tank not installed (C)
Ink tank not installed (BK)
Ink tank not Installed (MBK)
Ink tank not installed (MBK2)
Ink tank ID error (Y)
Ink tank ID error (M)
Ink tank ID error (C)
Ink tank ID error (BK)
Ink tank ID error (MBK)
Ink tank ID error (MBK2)
Ink tank EEPROM error (Y)
Ink tank EEPROM error (M)
Ink tank EEPROM error (C)
Remaining ink low (M)
Ink tank EEPROM error (BK)
Remaining ink low (BK)
Ink tank EEPROM error (MBK)
Ink tank EEPROM error (MBK2)
Remaining ink low (MBK)
Remaining ink low (MBK2)
Remaining ink low (Y)
Remaining ink low (C)
Maintenance cartridge tank full
Empty capacity of the maintenance cartridge when cleaning it various is insufficient.
Maintenance cartridge not installed
Maintenance cartridge EEPROM error
Maintenance cartridge ID error
The cut sheet is not set though the data of the cut sheet specification was received.
Manually fed cut sheet was already loaded even though received data indicated roll media
When the roll paper was loaded, the data of the cut sheet specification was received.
The form set position is unsuitable to the print of edge none.
Data is unsuitable to the print of edge none.
Roll paper running out
Cutting failure
MIT data transfer failure
Forwarding ROM data machine kind difference
Sensor calibration error(not generated in the use mode.)
Description
Recovery system rotation court reached 50,000.
Feed system counting error
Borderless/idle ejection/mist recovery count full
Abnormally high printhead temperature
No ink ejection counting error
Checksum error
Flash memory clearing error
Flash memory write error
Main controller error
EEPROM size error
EEPROM write error
RTC error
RTC low battery error
RTC clock stopped
T-8-4
Display message
ERROR Exxx-xxxx
Call For Service
Chapter 8
0013-7771
8-3