Canon 1692B002 Service Manual page 110

Chapter 4
Never peel off tape [1] that fixes the ink tube when detaching the joints of the ink tube on the upper part of the carriage or when removing the joint base from the
carriage.
10) Twist off belt fixer knob [1] to loosen the belt, and remove spring [2], guide [3] and pulley[4].
11) Release carriage belt from the pulley of the carriage motor.
12) Remove two screws [1] and pulley base [2].
13) Remove screw [3] and the connector [4] to release head management sensor unit [5].
14) Remove five screws [6] and lift unit [7].
4-14
[1]
F-4-30
[3]
[2]
[4]
F-4-31
[1]