Setting The Subwoofer Setup; Setting The Distance - Denon AVR-887 Operating Instructions Manual

ENGLISH
Advanced Setup – Part 2

Setting the Subwoofer Setup

Select the method of playback of the subwoofer for playing the low
bass signals.
1
D D H H
Press to select "Subwoofer Setup", then press
ENTER
.
2
F F G G
Press to set.
LFE:
For any channel(s) that are set to "Large", low frequencies in that
channel's corresponding source are directed to that loudspeaker
only. The low frequencies played from the subwoofer are only the
LFE signals and the low frequencies of channels set to "Small".
LFE+Main:
Low frequencies from speaker channels that have been set to
"Large" are reproduced from those speakers as well as from the
subwoofer(s).
3
ENTER
Press .
1
2
• The subwoofer mode setting is only valid when and "Yes" is set for
the subwoofer in the "Setting the Speaker Configuration".
• Select the "LFE+Main" mode if you want low frequency signals to
always be played from the subwoofer channel.
• Select the mode achieving a voluminous bass sound when playing
music or movie sources.

Setting the Distance

This parameter is for optimizing the timing with which the audio
signals are produced from the speakers and subwoofer according to
the listening position.
Preparations:
Measure the distances between the listening position and the
speakers (L1 to L8 on the diagram at the below).
FL C
SW
L3
L1 L2
L4
L5 L6
SL
L7 L8
SBL SBR
1 D D H H
Press to select "Distance", then press
2
F F G G
Press to select "Meters" or "Feet".
3 D D H H
Press to select the speaker, then press
4
ENTER
Press .
61
ENGLISH
1
3
FR
Listening position
SR
• Press D D to select "Step", then press F F G G to change the amount of
variation if so desired.
• The distance changes in units of 1 foot (0.1 meters) or 0.1 foot (0.01
meters) each time the button is pressed. Select the value closest to
ENTER
.
the measured distance.
• Please note that the difference of distance for every speaker
should be 20 ft (6.0 m) or less. If you set an invalid distance, a
CAUTION notice, such as screen right will appear. In such cases,
move the appropriate speaker to the position of the displayed
value.
F F G G
to set.
Advanced Setup – Part 2
2
..... L1
..... L2
..... L3
..... L4
..... L5
..... L6
..... L7
..... L8