Listening To Music; Viewing Still Pictures And Videos (Only For Ipods Equipped With The Slideshow / Video Function); Disconnecting The Ipod - Denon AVR-887 Operating Instructions Manual

ENGLISH
Advanced Operation
ZONE2
<ON/STANDBY>
[OFF]
[ENTER]
ZONE2
[MODE]
[MEMORY]
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit

Listening to music

STATUS
1
[D D H H ]
Press
[G G ]
or .
Press [F F ] to return to the music menu screen.
2
[ENTER]
Press
• Playback starts.
Pause:
Press [ENTER] during playback.
Press again to resume.
Manual search:
Press and hold in [D D H H ] during playback.
• D D : Fast reverse
• H H : Fast forward
Track search:
Press [D D H H ] during playback.
• D D : Move to beginning of previous track
• H H : Move to beginning of next track
[VOLUME]
Stop:
Press [ENTER] for at least 2 seconds during playback.
Repeat play:
Press [MODE].
[D H F G]
The mode switches as follows each time [MODE] is pressed.
• RPT One: Single track repeat
STATUS
• RPT All: All track repeat
Shuffle play:
Press [MEMORY].
The mode switches as follows each time [MEMORY] is pressed.
• SFL Songs: Single track shuffle
• SFL Albums: Album shuffle
The mode switches between the Browse mode and the Remote
mode if [MODE] is pressed for at least 2 seconds.
In the Remote mode, only [D D H H F F G G ] and [ENTER] can be used.
[ENTER]
[D H F G]
[ENTER]
to select the music file, then press
[G G ]
or .
41
ENGLISH
• When STATUS is pressed during playback, the front panel display
switches between the title name, artist name and album name.
• Depending on the iPod's software version, it may not be possible to
operate the iPod from the AVR-887. Use the latest version of the
software. Information on the latest version of the software can be
obtained on the Apple Computer website.
• If you do not want the on screen display to be displayed while
playing the iPod, set "Function/Mode Status" at "Setting the On
Screen Display" to "OFF" ( page 55).
• With the AVR-887 it is possible to display folder names and file
names on the screen like titles. The AVR-887 can display up to 64
characters, consisting of numbers, capital letters and small letters.
A "?" mark is displayed in place of non-compatible characters.
Viewing still pictures and videos
(only for iPods equipped with the slideshow /
video function)
Use this procedure to view photo and video data stored on the iPod
on a monitor.
[MODE]
Press for at least 2 seconds to switch from the
1
Browse mode to the Remote mode.
• "Remote iPod" is displayed on the AVR-887's display.
Watching the iPod's screen, press
2
[ENTER]
"Photos" or "Video", then press
• The iPod's photo and video data are displayed on the monitor.
• To output photo or video data recorded on the iPod to the monitor,
the iPod's "TV Out" setting (under "Video Settings") must be set to
"ON".
For details, refer to the iPod's operating instructions.

Disconnecting the iPod

< ON/STANDBY >
[OFF]
Press or and set the AVR-887's
power to the standby mode.
The iPod can be disconnected after switching to a function other
than the one to which the iPod input is assigned.
Advanced Operation
[D D H H ]
to select
[G G ]
or .