Check The Parameter; Connecting Other Sources; Cable Indications - Denon AVR-787 Operating Instructions Manual

ENGLISH
Easy Setup Procedure

Check the parameter

• The results of the measured items can be checked.
• This item is displayed, after the measurement result of the "Auto
Setup" is decided.
1 D D H H
Press to select "Parameter Check", then press
ENTER
.
2 D D H H
Press to select the item, then press
3
ENTER
Press .
1
2
Example: Speaker Configuration Check
• To reset:
Press D D H H to select "Restore" at the "Parameter Check" screen,
then press F F .

Connecting Other Sources

Cable indications

The hookup diagrams on the subsequent pages assume the use of the following optional connection cables (not supplied).
A
ENTER Analog connections (Stereo)
.
(White)
(Red)
B
Analog connections (Monaural, for subwoofer)
C
Digital connections (Coaxial)
h h
(Orange)
(Press ENTER.)
D
Digital connections (Optical)
E
Speaker connections
NOTE:
• Do not plug in the power supply cord until all connections have been completed.
• When making connections, also refer to the operating instructions of the other components.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Do not bundle power cords together with speaker cables. Doing so could result in humming or noise.
Audio cable
L L
R R
Pin-plug cable
Pin-plug cable
Coaxial cable (75 Ω/ohms pin-plug cable)
Optical fiber cable
Speaker cable
13
ENGLISH
Video cable
F
Video connections
(Yellow)
Video cable (75 Ω/ohms video pin-plug cable)
G
S-Video connections
S-Video cable
H
Component video connections
(Green)
(Blue)
(Red)
Component video cable
Signal direction
Audio signal
IN OUT OUT
Video signal
IN OUT OUT
(Y)
(P /C )
B B
(P /C )
R R
IN
IN