Connecting The Pre Out Terminals; Connecting The Power Supply Cord - Denon AVR-787 Operating Instructions Manual

Connecting Other Sources

Connecting the PRE OUT terminals

• Use these terminals if you wish to connect external power amplifier(s) to increase the power of the
front, center, surround and surround back sound channels, or for connection to powered loudspeakers.
• When using only one surround back speaker, connect it to the left channel.
Power amplifier
B
CENTER
A
SURROUND
L L L
R R
R
A SURROUND
BACK
L L
L
R R
R
B
SUB-
WOOFER
A
FRONT
L L L
R R R
20
ENGLISH

Connecting the power supply cord

NOTE:
• Insert the plugs securely. Incomplete connections will result in the generation of noise.
• Only use the AC OUTLETS for audio equipment. Never use it for hair driers, monitors or other electrical
appliances.
ENGLISH
Connecting Other Sources
AC outlet
(wall)
AC 120 V, 60 Hz
AC OUTLETS
• SWITCHED (total capacity – 120 W (1 A))
The power to the outlet is turned on and off in
conjunction with the POWER switch on the
main unit, and when the power is switched
between on and standby from the remote
control unit.
No power is supplied from this outlet when
this unit's power is at standby. Never connect
equipment whose total power consumption
exceeds 120 W (1 A).