Advanced Setup - Part 1; System Setup Items And Default Values - Denon AVR-787 Operating Instructions Manual

ENGLISH
Advanced Setup – Part 1

System setup items and default values

1. Auto Setup
2. Speaker Setup
Items
The AVR-787 performs an analysis of the speaker system and measures
1 Auto Setup the acoustic characteristics of your room to permit an appropriate
automatic setting.
Items
Automatically set the output component and properties for the various
Speaker
1 channels according to the combination of speakers to be actually used for
Configuration
surround playback.
Subwoofer Select the method of playback of the subwoofer for playing the low bass
2
Setup signals.
This parameter is for optimizing the timing with which the audio signals
3 Distance are produced from the speakers and subwoofer according to the listening
position.
Set the volume of the various speakers so that the sound output from the
4 Channel Level
speakers and the subwoofer seems to have the same volume level.
Crossover Set the frequency (Hz) below which the bass sound of the various speakers
5
Frequency is to be output from the subwoofer.
Front Sp.
Large
Front
L & R
12 ft
Front Front
L
0 dB 0 dB
43
ENGLISH
Default settings
–
Default settings
Center Sp. Subwoofer Surround Sp.
Small Yes Small
LFE (Normal)
Surround
Center Subwoofer
L & R
12 ft 12 ft 10 ft
Surround Surround
Center Surround L Surround R
R Back L Back R
0 dB 0 dB 0 dB 0 dB 0 dB
80 Hz
Page
9 ~ 12
Page
Surround Back
Sp.
54, 55
Small / 2sp
55
Surround
Back
55, 56
10 ft
Subwoofer
56, 57
0 dB
57