ENGLISH
Connecting Other Sources
Connecting the antenna terminals
An FM antenna cable plug can be connected directly to the unit.
Direction of broadcasting
station
FM antenna
75
/ohm
COAXIAL cable
FM indoor antenna
(Supplied)
Ground
AM loop antenna
(Supplied)
AM outdoor antnna
2 AM loop antenna assembly
Connect to the AM
antenna terminals.
1
2
Remove the vinyl tie
Bend in the reverse
and take out the
direction.
connection line.
4
a. Antenna placed on
a stable surface.
Mount
b. Hanging the
antenna on a wall.
Use the
installation hole to secure the antenna to a wall, etc.
Note to CATV system installer:
This reminder is provided to call the CATV
system installer's attention to Article 820-40
of the NEC which provides guidelines for
proper grounding and, in particular, specifies
that the cable ground shall be connected to
the grounding system of the building, as
close to the point of cable entry as practical.
15
ENGLISH
Connecting Other Sources
Connection of AM antennas
3
1. Push the lever.
2. Insert the conductor.
3. Return the lever.
NOTE:
• Do not connect two FM antennas
simultaneously.
• Even if an external AM antenna is used, do
not disconnect the AM loop antenna.
• Make sure the AM loop antenna lead
terminals do not touch metal parts of the
panel.