Denon AVR-682 Operating Instructions Manual page 13

Speaker system connections
• Connect the speaker terminals with the speakers making sure that like
polarities are matched (< with <, > with >). Mismatching of polarities will
result in weak central sound, unclear orientation of the various instruments,
and the sense of direction of the stereo being impaired.
• When making connections, take care that none of the individual conductors
of the speaker cord come in contact with adjacent terminals, with other
speaker cord conductors, or with the rear panel.
NOTE:
NEVER touch the speaker terminals when the power is on.
Doing so could result in electric shocks.
1. Loosen by turning
counterclockwise.
1. Push the lever.
CENTER SPEAKER SYSTEM
AUDIO
R
AM
LOOP
ANT.
FM
COAX.
75
ANTENNA TERMINALS
FR FL
SW C
SR SL
EXT. IN
Connection jack for subwoofer with built-in
amplifier (super woofer), etc.
To achieve Dolby Digital (AC-3) playback
effect, use a unit that can sufficiently
reproduce frequencies of under 80 Hz.
Connecting the speaker cords
2. Insert the cord.
2. Insert the cord.
FRONT SPEAKER SYSTEMS
DIGITAL PRE OUT
L IN IN
SUB
CD
WOOFER
DVD/
DVD/
VDP VDP
IN
TV/ TV/
COAXIAL
DBS DBS
VCR
VCR
CDR/ OPTICAL
MONITOR
TAPE
VCR
VCR
CDR/
OPTICAL
TAPE
OUT
OUT OUT
VIDEO
SURROUND SPEAKER SYSTEMS
Speaker Impedance
• When speaker systems A and B are use separately, speakers with an
impedance of 6 to 16
• Be careful when using two pairs of front speakers (A + B) at the same time,
since use of speakers with an impedance of 12 to 16
• Speakers with an impedance of 6 to 16
as center and surround speakers.
• The protector circuit may be activated if the set is played for long periods of
time at high volumes when speakers with an impedance lower than the
specified impedance are connected.
3. Tighten by turning
clockwise.
3. Return the lever.
System A
( L ) ( R )
IN
OUT
DVD/ TV/
VDP DBS VCR MONITOR VCR
S-VIDEO
SPEAKER SYSTEMS
FRONT CENTER SURROUND
B A
R L R L
R L
SPEAKER IMPEDANCE
FRONT A OR B / 6 16 CENTER / 6 16
A + B / 6 16 SURROUND / 6 16
• Precautions when connecting speakers
If a speaker is placed near a TV or video monitor, the
colors on the screen may be disturbed by the
( L ) ( R )
speaker's magnetism. If this should happen, move
the speaker away to a position where it does not
have this effect.
/ohms can be connected for use as front speakers.
/ohms.
/ohms can be connected for use
Connecting banana plugs
banana plug
Turn clockwise to tighten, then insert the
banana plug.
FRONT SPEAKER SYSTEMS
System B
( L ) ( R )
AC OUTLETS
AC 120V 60Hz
SWITCHED
TOTAL 120W(1A.) MAX.
ENGLISH
13