Manual Tuning; Preset Stations; Checking The Preset Stations; Recalling Preset Stations - Denon AVR-1906 Operating Instructions Manual

Basic Operation

Manual tuning

1
Set the input source to "TUNER".
2
Watching the display, press the
select the desired band (AM or FM).
3
MODE
Press the button to set the manual tuning
mode.
Check that the display's "AUTO" indicator turns off.
4
TUNING
Press the (+) or (–) button to tune in
the desired station.
The frequency changes continuously when the button is
held in.
• When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the "STEREO" indicator turns off.

Preset stations

1
Use the "Auto tuning" or "Manual tuning"
operation to tune in the station to be preset in
the memory.
BAND
button to
2
MEMORY
Press the
3
Press the
memory block (A to G).
4
PRESET
Press the
desired preset channel (1 to 8).
5
MEMORY
Press the
• Store the station in the preset memory.
• To preset other channels, repeat steps 1 to 4.
A total of 56 broadcast stations can be preset — 8 stations
(channels 1 to 8) in each of blocks A to G.
button.
SHIFT
button and select the desired
(+) or (–) button to select the
button again.
30
ENGLISH

Checking the preset stations

The preset (broadcast) stations can be checked on the on-screen
display.
ON SCREEN
Press the button repeatedly until the
"Tuner Preset Stations" screen appears on the OSD.

Recalling preset stations

1
Watching the display, press the
select the preset memory block.
2
Watching the display, press the
ª ª
(–) button to select the desired preset channel.
ENGLISH
Basic Operation
SHIFT
button to
PRESET •
(+) or