Connecting The Multi Zone Terminals; Zone2 Out Connections; Zone2 Speaker Out Connections - Denon AVR-1906 Operating Instructions Manual

Connecting Other Sources

Connecting the MULTI ZONE terminals

For instructions on operations using the MULTI ZONE functions (

ZONE2 out connections

• If another power amplifier or pre-main (integrated) amplifier is connected, the ZONE2 out
(variable/fixed level) terminals can be used to play a different program source in ZONE2 the same
time ( page 35, 36).
• When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired
and connected between the MAIN ZONE and ZONE2, the remote-controllable devices in the
MAIN ZONE can be controlled from ZONE2 using the remote control unit.
Extension terminals for future use.
NOTE:
• For instructions on installation and operation of separately sold devices, refer to the devices'
operating instructions.
page 35~37).
Power amplifier
(ZONE2)
A
(Variable)
L
L L
IN
R R
R
Power amplifier
(ZONE2)
A
(Fixed)
L
L L
IN
R R
R
RC-617 INFRARED SENSOR
+
OUTPUT
+
INPUT
AUX OUT
RC-616 INFRARED
RETRANSMITTER

ZONE2 speaker out connections

• When the power amplifier is assigned to the ZONE2 output channel at "Power Amp Assign." in
the "System Setup" menu, the surround back speaker terminals can be used as the ZONE2
speaker out terminals ( page 36).
• The connections diagram below is an example for when the surround back speaker is assigned
to the ZONE2 stereo 2 channel.
In this case, surround back speaker out can not be used for MAIN ZONE.
Center
Subwoofer
speaker
> <
Connection terminal
for subwoofer with
built-in amplifier
(subwoofer), etc.
( L ) ( R )
< > > <
Front speaker
systems (B)
16
ENGLISH
Connecting Other Sources
Surround speaker
systems
( L )
IN
> < >
( L )
( L ) ( R )
< > > <
>
Front speaker ZONE2 speaker
systems (A) systems
NOTE:
• The settings must be
changed to use this
speaker for ZONE2
( page 44).
ENGLISH
( R )
<
( R )
< > <