Entering the code
The menu "Settings - Supervisor level" is locked with a
code to prevent unauthorized access (except
Language ). It must be activated by Technical Service.
Settings
Supervisor level
Select "Access via code" and confirm.
Enter the code "0 0 0" (factory default).
If a wrong code is entered three times, the code entry will
be locked for 1 hour.
Turn the jog shuttle until the first digit shows. Confirm the
digit. Enter the second and third digits.
OK
Confirm the code.
Settings - Supervisor level
Back
Access via code
0
_
_
Please enter code
0
0
0
Please confirm code
Back
57