Ii - 7 Specifications For Turning - HEIDENHAIN ND 522 - 2-2011 User Manual

II - 7 Specifications for Turning

ND 522/523 Data
Axes
Encoder inputs
Display step
Display
Functions
Backlash Compensation
Error Compensation
Data interface
Accessories
Main power input
Operating temperature
Storage temperature
Degree of protection (EN 60529)
Weight
ND 522/523
2, or 3 axes from A to Z, Z0, 0-9
Digital TTL Signal levels; input frequency max. 100 kHz for incremental
HEIDENHAIN encoders
Linear axes: 1 mm to 0.1 µm
Rotary axes: 1° to 0.0001° (00°00'01")
Monochrome display for position values, dialogue, and input display, graphic
functions, graphic positioning aid
Status display:
tool number, operating mode, REF, inch/mm, scaling factor, feed rate,
diameter display Ø, stop watch, datum
REF reference-mark evaluation for distance-coded, or single reference marks
Distance-to-go mode, nominal position input (Incremental, or Absolute )
Scaling factor
HELP: On-screen operating instructions
INFO: Calculator, taper calculator, user, and operating parameters
10 datum point, 16 tools
Freezing tool position for back-off
Rotary encoder applications with ballscrews
Linear, and non-linear, up to 200 measuring points
USB (type B connector) 115 200 baud
For output of measured values, and parameters;
For input of parameters, remote keys, and commands
Mounting Base
Universal Mounting Arm Kits
100 V to 240 V; 50 Hz to 60 Hz; power consumption 25 VA max.
0°C to 45°C (32 °F to 113 °F)
-20°C to 70°C (-4°F to 158°F)
IP 40 (IP 54 front panel)
2.6 kg
87