Graphic Positioning Aid; Status Bar Settings; Stopwatch - HEIDENHAIN ND 522 - 2-2011 User Manual

Graphic Positioning Aid

The GRAPHIC POSITIONING AID form is used to configure the bar
graph that is shown below the axes' display in Incremental mode.
Each axis has its own range.
U Press the ON/OFF soft key to enable, or simply begin entering
values using the numeric keys. The current position box will begin
moving when the position is within range.

Status Bar Settings

The Status Bar is the segmented bar at the top of the screen which
displays current datum, tool, feed rate, stop watch, and page indicator.
U Press the ON/OFF soft key for each setting to be displayed.

Stopwatch

The stopwatch shows the hours (h), minutes (m), seconds (s). It
operates like a stop watch showing elapsed time. (The watch starts
timing from 0:00:00).
The elapsed time field shows the total accumulated time from each
interval.
U Press the START/STOP soft key. The status field will read
RUNNING. Press it again to stop time from elapsing.
U Press RESET to reset the elapsed time. Resetting will stop the
watch if it is running.
Pressing the DECIMAL KEY while in operating mode, will
also stop, and start the clock. Pressing the ZERO key will
reset the clock.
ND 522/523 25