Ii - 3 Encoder Parameters; Example Settings For Heidenhain Linear Encoders; Example Settings For Heidenhain Rotary Encoders; Example Settings For Heidenhain Angle Encoders - HEIDENHAIN ND 522 - 2-2011 User Manual

II - 3 Encoder Parameters

The following tables represent a partial list of encoders. These tables
describe all operating parameters that must be set for the encoders.
Most entries can be found in the operating instructions for that
encoder.

Example settings for HEIDENHAIN linear encoders

Encoder Signal period
LS 328C 5µm
LS 628C
LB 382 with 1µm
IBV 101
LB 382C with 1µm
IBV 101
LS 378C 1µm
LS 678C

Example settings for HEIDENHAIN Rotary encoders

Rotary Line Count
Encoders
ROD 420 50 to 5000
ROD 426 50 to 10000
ROD 1020 250 to 3600
ROD 1070 1000 to 3600
ERN 120 1000 to 5000
ERN 420 250 to 5000
ERN 1020 250 to 3600
ERN 1070 1000 to 3600

Example settings for HEIDENHAIN Angle encoders

Angle Line Count
Encoders
ROD 225 9000, or 10000 36 to 18 arc sec
ROD 275 18000
ND 522/523
Reference marks
Single/1000
Single
Single/2000
Single/1000
Resolution Reference
mark
1.8° to 64.8 arc sec single
1.8° to 32.4 arc sec single
.36° to 90 arc sec single
32.4 to 9 arc sec single
324 to 64.8 arc sec single
.36° to 64.8 arc sec single
.36° to 90 arc sec single
32.4 to 9 arc sec single
Resolution Reference
mark
single
3.6 to 1.8 arc sec single
79