I I I . C O N T R O L P A N E L S - Lexicon STUDIO - ADDENDUM Manual

III. Control Panels
New functionality has been added to the Studio Control Panels since the printing of the
manual. The information in the section is in addition to that which you will find in your
printed manual.
Control I/O
A Turbo Select feature has been added to the Control I/O panel. Turbo select allows you
to optimize audio playback and record on your system, in regards to the speed and
performance of your computer system. Older legacy machines do not have the processing
capability to play or record 32 streams of digital audio simultaneously without glitching.
Leaving the Turbo Select box unchecked will optimize these systems to have less
throughput channels, but higher quality audio. If you are experiencing pops and clicks, or
otherwise glitchy audio in a slower machine, you should uncheck this box. Note that with
Turbo Select off, you are limited to 24 streams of digital audio at 44.1 kHz sample rate and
21 at 48 kHz sample rate.
If your computer system is fairly new (Pentium II, 266 MHz or higher), you should engage
Turbo Select to get optimum performance out of your Lexicon Studio. The default setting for
Turbo Select is off. Off is the recommended setting for Pentium I 200 mHz machines or
slower.
8.
Lexicon Studio User Guide Addendum