Routing; Pc-90 R Outing - Lexicon STUDIO - ADDENDUM Manual

PC-90 Routing
The PC-90 is capable of extensive routing. Although not covered in the printed manual, it is
possible to daisy-chain the PC-90 reverb engines to make a dual-engine reverb. This is
useful for creating your own "super-reverbs". A good example of this would be to use
Machine 1 as the early reflections part of the reverb and Machine 2 as the main reverb. In
the early days of digital reverberation, creating your own reverbs was essential to get great-
sounding reverb. Today, this is still common practice for many people, so we have enabled
the PC-90 to be a great reverb construction kit.
To route you PC-90 to do this, select the inputs and outputs within the Reverb Control Panel
as indicated below:
1. Set your Machine 1 inputs to VST_AuxSend 1L and VST_AuxSend 1R.
2. Set your Machine 1 outputs to VST_AuxRet 1L and VST_AuxRet 1R.
3. Set your Machine 2 inputs to AuxRet 1L and AuxRet 1R.
4. Set your Machine 2 outputs to 12T_Analog_Out L and 12T_Analog_Out R.
5. Lastly, make sure the channel of the audio you wish to process is sending from AuxSend
1 into the PC-90.
You now have created a cascade reverb within PC-90. This will give you immense flexibility
when creating your own super-reverbs.
24.
Lexicon Studio User Guide Addendum