Alamo Interstater TS-100A, TS-115A, TS-125A, TS-135A Assembly Instruction Manual page 31

Remote Control Cable Connections
Remote Control Cable Connections Cab Tractor: (continued)
4.
Install Wire Harness through floor and
boot. The Wire harness will come to you with the on
/ off switches attached, these switches will need to
be removes to Push the Wire Harness up through
the floor and boot cover (See Figure 15 & 18).
5.
Insert Cables up through Boot Cover. Mark
the cables as to which is which on the control valve
as they need to be connected in the same order on
the inside of the cab as they are connected to the
control valve (See Figure 17)
Figure 15
Figure 17
Interstater (NH TS-100A , 115A , 125A & 135A Asy. Manual) 06/04
© 2004 Alamo Group Inc.
Figure 14
Figure 16
Switches unpluged and
Mark on Cable
to reference
through the Fllot and
which it is on
the control
valve
Page 4 - 5
Screw the cover to the
Rubber Floor Mat with
the screws furnished.
Control cable
Wire Harness
Cable Cover
Boot
removed to run up
boot cover
Figure 18
(Cab Tractor)