Chorus Effects; Chorus - Lexicon MPX 1 - REV User Manual

Multi processor fx
Hide thumbs Also See for MPX 1 - REV:
Table of Contents

Advertisement

MPX 1 User Guide

Chorus Effects

Chorus

This is a true stereo, multi-voice
chorus. Use it to enrich guitars,
keyboards, etc. It has Dual 2-tap
modulators with cross resonance.
The Pulse Width controls allow
independent adjustment of the
waveshape. (At 0, the sinewave
becomes a sawtooth with a fast
rise and slow fall.) The Depth con-
trols provide adjustment of the
chorus from 0-100%.
Dynamic Chrs
Rich Chorus
7-6
The chorus effects are generally used to enhance a sound by modulating delay times and/
or frequency content in various ways. Of course, the classic effects of this type : Chorus,
Flanger and Phaser are all here – along with several other variations such as: Rotary
Cab, Aerosol, Orbits, Centrifuge, Comb 1 and Comb 2.
All of the Chorus effects have one or two resonance parameters. These parameters
control the level and phase of the effect output signal that is recirculated into the effect
inputs. Use care when adjusting these parameters, as they can cause overload (or
feedback-like howls) if they are set too high — even with little or no input signal present.
As a general rule, the combined value of any resonance parameters should always be
less than 100 — but pay close attention to levels whenever the total resonance is above
50. If you use high resonance values (to produce a deep flange effect, for example) and
the clip LEDs light while the Headroom LEDs are less than 0dB, try turning down the level
of the effect that precedes the Chorus block.
Mix
0-100%
Level
Off, -89 to +6dB
Rate1
0-50Hz or
1:24-24:1 cycles/beat
(Rate1 Units)
PW 1
0-100%
Dpth1*
0-100%
Rate2
0-50Hz or
1:24-24:1 cycles/beat)
(Rate 2 Units)
PW 2
0-100%
Dpth2*
0-100%
Res 1
-100 to +100
Res 2
-100 to +100
* = Interpolated; ( ) = Option of preceding parameter
Dry/Wet ratio
Amount of effect in the processed signal
Left and right A rate
Selects frequency or cycles/beat
Left and right A pulse width
Left and right A depth
Left and right B rate
Selects frequency or cycles/beat
Left and right B pulse width
Left and right B depth
Left to right resonance
Right to left resonance
Lexicon

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mpx 1

Table of Contents