Setting The Parameters Of The Internal Controllers - Lexicon MPX 1 - REV User Manual

MPX 1 User Guide
Setting the Parameters
of the Internal Control-
lers (Knob, LFO 1 and 2,
Arpeggiator,
ADSR 1 and 2,
Random, A/B,
Sample & Hold,
Env 1 and 2
Step or scroll as you like.
Press Value at any time to toggle the
functions of the knob and the < and
> buttons.
3-14
The last of the MPX 1 Edit menu selections provide controls for making individual
adjustments and assignments for each of the MPX 1 internal controllers. This
section describes controller editing. For detailed information on the controllers
themselves, see Chapter 8.
Making controller adjustments is straightforward. Press Edit and select the
controller you want to adjust. The first of the controller selections (Knob) is
shown here as an example. (Although each controller has a different set of
parameters, the method for selecting and adjusting them is identical.)
Use the < and > buttons to step through the available parameters of the selected
controller and the knob to adjust controller settings.
Edit select:
> Knob
Successive screens show each controller
parameter and its current value
Ctls:Knob
< >
Use the < and >buttons
to move back and forth
between the controller
selection screen and
each of the related pa-
rameter screens.
Once you have adjusted the selected controller to your satisfaction, you can step
back through the parameter screens, or press Edit to return to the main Edit
menu.
To exit Edit mode, press Program or System to select another mode of
operation.
Controller selected for adjustment
Value
n
Ctls:Knob Low
< >
Ctls:Knob
< >
Ctls:Knob
< CustomAdj
Lexicon
value of displayed controller
parameter
n
High
n
Name