Part Names And Functions; Dvd Audio - Denon DVD-3910 Operating Instructions Manual

5 PART NAMES AND FUNCTIONS

(1) Front Panel
See page 3.
q
Power ON/STANDBY button
• Press once to set to the standby mode. The indicator
lights up in red.
• Press again to turn the power on. The indicator lights up in
green.
w
Power indicator
• This indicator lights when the power is on and when the
power is in the standby mode.
Light green : Power is on
Light red : Power is in the standby mode
e
Power switch
• Press once to turn the power on.
• Press again to set to the "OFF" position and turn the
power off.
r
DENON LINK indicator
• This indicator lights when the audio signals are transferred
by DENON LINK connections.
t
AL24 PLUS indicator
• This indicator lights when the audio signals of a DVD, etc.,
are being processed digitally with the AL24 processing
Plus.
y
Display
• Information on the disc that is currently playing is shown
on the display.
u
Remote control sensor
i
SELECT of HDMI/DVI button
• Press this to set the video signal output from the HDMI
connector or the DVI connector.
HDMI Y Cb Cr
HDMI/DVI OFF
o
FORMAT of HDMI/DVI button
• Press this to set the video signal format from the HDMI
connector or the DVI connector.
480P/576P 720P
!0
VIDEO MODE button
• Use this to instantly change the adjustment mode of the
stored video signals.
The unit will return to the stored setting values when the
power is switched off.
(The setting values of this mode will not be stored.)
• PICTURE MODE
STD M1 M2
• PROGRE. MODE (PROGRESSIVE)
AUTO1 AUTO2 VIDEO1
• TV TYPE
MULTI NTSC PAL
• SQUEEZE MODE
No effective for interlaced image.
OFF ON
(See page 22.)
(See page 53.)
HDMI RGB DVI
(See page 53.)
1080i
M3 M4 M5
VIDEO2 VIDEO3
(See page 37.)
!1
Select the playback area/layer of SUPER AUDIO
CD (SUPER AUDIO CD SETUP)
• Switch the area /layer of the Super audio CDS played with
priory.
• MULTI.......When playing Super audio CDs, the Multi
channel area is played with priory
• STEREO....When playing Super audio CDs, the stereo
channel area is played with priority.
• CD.............When playing Super audio CDs, the CDs layer
is played with priority.
MULTI STEREO
!2
PURE DIRECT SELECT button
• Press to switch the modes with the specific video signals
and digital audio signals and indicate in display on and off.
NORMAL MODE 1
!3
DVD/AUDIO/VIDEO logo
• This indicator lights when playing the DVD audio or DVD
video.
!4
Super Audio CD logo
• This indicator lights when playing the Super audio CD.
!5
Disc tray
• Load discs here.
• Press the OPEN/CLOSE button
disc tray.
• The disc tray is also closed when the PLAY button
pressed.
!6
OPEN/CLOSE button (
• Press this to open and close the disc tray.
!7
STILL/PAUSE button (
• Press this to pause images or music or to play images
frame by frame.
!8
PLAY button ( )
1
• Press this to play the disc.
!9
STOP button ( )
2
• Press this to stop the disc.
@0
Skip button ( )
8
• Press this to move back to the beginning of the current
track (or chapter).
• Press again to move back to the beginning to the previous
track (or chapter).
@1
Skip button ( )
9
• Press this to move ahead to the beginning of the next
track (or chapter).
@2
Slow/Search buttons (
• Press this to set the slow or search play mode.
: search in the reverse direction.
6
: search in the forward direction.
7
ENGLISH
CD
(See pages 47, 48.)
MODE 2 ALL OFF
(See page 25.)
!6
to open and close the
!8
)
5
(See pages 25, 56.)
)
3
(See page 58.)
(See page 57.)
(See page 58.)
(See page 59.)
(See page 59.)
)
6 7
(See pages 58, 59.)
is
21