Status Information - NETGEAR RN12P0610-100NAS - ReadyNAS 3200 RN12P0610 NAS Server Hardware Manual

Status Information

You can obtain information about the status of your unit by reviewing the indicators listed in
the following table.
Table 6. Status indicators
Indicator
Power LED
Disk LED
Power diagnostic LED
Fan LED
Disk LEDs on disk tray
Ethernet LEDs (front panel) The Ethernet port LEDs have these states:
1-gigabit Ethernet port
LEDs (rear panel)
10-gigabit Ethernet ports
(rear panel)
NOTE: 4200 only with
CX4 or SFP PCIe card
NETGEAR ReadyNAS Rack-Mount Storage Systems
Description
The LED has these states:
• On. The unit is powered on.
• Off. The unit is powered off.
The LED has these states:
• On. A disk is active.
• Off. No disk is active.
The LED has these states:
• On. Power failure
• Off. Normal operation
The LED has these states:
• On. Overheating or fan failure
• Off. Normal operation
The top LED indicates disk activity as follows:
• Blinking. The disk in the bay is active.
• Off. The disk in the bay is inactive.
The bottom LED indicates disk failure, as follows:
• Off. Normal operation
• On. Disk failure
• Green. An Ethernet cable is connected.
• Blinking. An Ethernet cable is active.
• Off. An Ethernet cable is disconnected.
The Ethernet port LEDs have these states:
• Amber. The LAN port is operating at 1 Gbps.
• Green. The LAN port is operating at 100 Mbps.
• Off. The LAN port is operating at 10 Mbps.
The Ethernet port LEDs have these states:
• Green. The LAN port is operating at 10 Gbps.
• Amber. The LAN port is operating at 1 Gbps.
ReadyNAS 3200 and 4200
31