NETGEAR RN12P0610-100NAS - ReadyNAS 3200 RN12P0610 NAS Server Hardware Manual page 40


To add a disk to a 1500 or 2100:
1. If necessary, unlock the disk tray lock, then press the disk release latch.
The tray handle pops out.
2. Pull out the disk dray and place a disk in the tray.
3. Assemble the disk tray.
Make sure that the hard disk connectors face the interior of the disk bay when you
reassemble the disk.
4. Slide the disk tray into the unit and secure the handle.
The volume automatically synchronizes with the new disk in the background. This could
take several hours depending on the disk size. You can continue to use your ReadyNAS,
although access is slower until the volume synchronization finishes. You are notified by
email when the process is complete.
NETGEAR ReadyNAS Rack-Mount Storage Systems
Maintenance
40